Varimixer Planetary Mixer 150 qt 51-1/4inx29-3/4inx67in

• VARIMIXER is a planetary mixer with a variable speed drive system.
• The mixer frame consists of a column with welded-on feet, and a top traverse closed by a stainless steel cover.
• The bowl is mounted in bowl arms, which are raised and locked simultaneously - or lowered and opened, respectively.
• The column contains the motor and the bowl arm mechanism.
• The top traverse contains the transmission system consisting of the moveable pulleys, the intermediate belt drive and the planetary head.
• Start and stop push buttons are mounted on a frontplate along with the contactor for protecting the motor against overload.
• A timer with HOLD feature is standard on the W100A.

CONSTRUCTION
• Mixer frame of extra heavy-gauge, welded, rolled steel plate.
• Silvergray hammertone powder coated finish.
• Top cover, coverplate system for the moveable bowl arms and planetary head cap in heavy-gauge stainless steel.
• Molded PVC feet pads.
• Bowls in stainless steel.
• Mixing tools in cast aluminum or stainless steel.
• Bayonet shaft in stainless steel.
• Variable speed V-belt transmission based on precision machined cast iron pulleys.
• Springloaded moveable pulleys in the variable speed drive for automatically adjusting of the tension of the special V-belt.
• Precision milled cast iron bowl arms lower and raise the bowl and clamp it in a precise position relative to the mixing tool allowing for small tolerances between tool extremities and the bowl.

STANDARD FEATURES
• By manually operating a single lever, the bowl raises and locks in position.
• Stainless steel bowl, ribbed spiral hook ,whip and aluminum beater.
• Dual tension belt drive pulleys eliminates slippage.
• Locking pin on tool instead of shaft.
• No bowl adaptors required for the downsize bowls.
• Bowl trucks come with a handle for easy use.
• Always the right mixing speed for the particular job with the variable speed drive.
• Unique planetary head design with very heavy duty shafts and bearings.
• Lubrication of planetary head only by permanent grease, no oil leakages into --- the bowl.
• Automatic stop of mixer when the bowl is lowered.
• Sanitary and easy to clean. Lip seal on planetary head prevents entrance of dust and water.
• Timer

DIMENSION DATA:
• Width Overall:  30 3/4 In.
• Depth Overall: 44 1/2 In.
• Height Overall: 63 In.

ELECTRICAL DATA FOR MOTOR
• 5 HP -- 12.7 amps 208/240 volt* 3 ph

MIXING SPEEDS
• Minimum Agitator Speed: 60 R.P.M.
• Maximum Agitator Speed: 270 R.P.M.

• Includes: Basic Machine plus 1 S/S 150-quart capacity Bowl, 1 S/S Dough Hook, 1 S/S Wire Whip , 1 Alumimum Beater, Bowl Truck, Timer (15-minute), and Bowl Screen

• This mixer is listed by: NSF and UL (Canada, and US)

• One year parts and labor limited warranty