Eagle Group Stainless Steel 2 Comp Sink Drainboard

412 Series Coved Corner Sink - 2 Compartments - Stainless Steel

• Bowl Size: 19"W x 16"L x 10-1/2"D
• Drainboards (1) 18"L RIGHT-HANDED drainboard
• Overall Size: 26"W x 55-1/2"L x 41-1/2"H

• All heavy gauge type 430 construction bowls and top assembly.
• Deep-drawn seamless coved corner bowls.
• Legs are braced front-to-back.
• Swirl-away drainage.
• Legs welded adjacent to sink bowls for maximum weight support and stability.
• 9-1⁄2" (241mm) standard backsplash includes 1" (25mm) upturn and tile edge for easy installation and feathering to wall/splash surfaces.
• Die-stamped creased drainboards for positive drainage.

NSF-approved installations:
• All EAGLE sinks bearing the NSF Certification Mark are built in compliance with the National Sanitation Foundation Standard Number 2.
• EAGLE is also listed to manufacture custom-built sinks in compliance with the National Sanitation Foundation Standard Number 2.

Material:
• Sink Bowls Heavy gauge type 430 stainless steel.
• Top Drainboards, backsplash and rolled rims are heavy gauge type 430 stainless steel.
• Legs 1-5⁄8" (41mm)-diameter heavy-gauge galvanized tubing with plated 12-gauge gussets and high-impact corrosion resistant fully adjustable bullet feet - crossbracing is 1" (25mm)-diameter heavy-gauge galvanized tubing.

Design and Construction Features:
• All bowls have deep-drawn one-piece seamless construction, using state-of-the-art hydraulic presses.
• Drainboards are integrally welded.
• All sink bowls have a generous radius with a minimum dimension of 3" (76mm) and are rectangular for maximum capacity.
• Leg locations are adjacent to sink bowls, providing increased stability and maximum weight support where needed.
• Leg gussets are welded to a die-cut heavy gauge reinforcing plate.
• Legs are braced front-to-back for added rigidity.
• Entire assembly is fuse-welded and planished, providing a one-piece seamless sink unit.
• 9-1⁄2" (241mm)-high full length standard backsplash features 1" (25mm) upturn and tile edge for easy installation and feathering to wall/splash surface.
• Welded areas are high-speed belt blended to match adjacent surfaces with continuity of satin finish.
• All outside corners of sink assembly are bullnosed to provide safe, clean edges.
• 10-1⁄2" (267mm) water level 13-1⁄2" (343mm) flood level.

Mechanical:
• Water supply is 1⁄2" (13mm) IPS for hot and cold lines.
• Faucet holes are 1-1⁄8" (29mm) punched on 8 (203mm) centers.
• Faucets are available as options (SOLD SEPARATELY).
• Basket-type waste drains included fit sink bowls 3-1⁄2" (89mm) opening and feature 1-1⁄2" (38mm) outlet.


***IMAGE DISPLAYS SIMILAR PRODUCT ONLY. THIS ITEM HAS 1 RIGHT-HANDED DRAINBOARD ONLY***