Refrigerated Pizza Prep Table - 60''

• Top, sides and ends are constructed of 18-gauge stainless steel
• Units are mechanically cooled with die stamped openings to accommodate 12" x 20" hotel pans or fractional pans
• Pans and adapter bars by others
• Pans are recessed 2" to provide proper cooling for NSF 7
• High density polyurethane foam throughout unit
• Dart style quick change gaskets
• Stainless steel removable hinged covers
• On/off switch and rail on/off is located behind the louver
• Front louver is hinged for access to condensing unit and allow adequate air flow back of the unit
• 8 long electrical cord
• Environmentally friendly HFC-404A refrigerant
• One year parts and 90 day labor standard warranty
• Side-mounted self-contained refrig system
• NSF-7


Dimensions : 60", double-section; 42" H x 60" W x 31.5" D
Capacity : 14 pan
Shelves: 2
Doors : (1) 27" & (1) 19"
Construction : 18 ga. stainless steel top with refrig pan rail; Stainless Steel ends
Electrical Connections : 115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8 (2.4m) cord and plug.
Amps : 12
HP : 1/3

OPTIONS AND ACCESSORIES
Stainless steel back
Laminate facing (full front)
Laminate end
Laminate back
Tray racks
Cutting board (.5 x 20)
Legs, set of four
Legs, set of six
Cheese grates with removable catch pans
18 deep single tier stainless steel overshelf
19" wide refrigerated drawers (2) high, holds 6" deep pans
19 wide refrigerated drawers (3) high, holds 4 deep pans
27 wide refrigerated drawers (2) high, holds 6 deep pans
27 wide refrigerated drawers (3) high, holds 4 deep pans
Lock
*220V/50 cycle electrical system
Additional shelf (specify door size)

* Inclusion of this option will alter the electrical specifications of the unit

SPECIFICATIONS
Exterior Top: Constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front. Top has a mechanically cooled refrigerated raised rail at the rear with openings to accommodate pans (provided by others). Rail interior is 22-gauge stainless steel. Raised rail openings have 20-gauge stainless steel removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rail. Temperature in top openings maintains 33°F (1°C) to 41°F (5°C) with pans recessed 2 (5.1cm) at 86°F ambient room temperature, meeting NSF 7 requirements.

Exterior Back and Bottom: 24-gauge galvanized steel. Exterior ends are finished with stainless steel.

Base Interior: Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25 (63.5cm) deep removable epoxy coated wire shelf. Base is insulated with 2 (5.1cm) high density foamed in place polyurethane. End of base has a machine compartment with condensing unit installed.

Door(s): 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner.

Refrigeration System: HFC-404A refrigerant. Cabinet has a blower coil assembly with expansion valve (1) on 48, 60 and 72 models, located in coil housing. Base is equipped with independently controlled thermostat, solenoid valve and condensate evaporator. Refrigerated base maintains temperature of 36°F (2°C) to 40°F
(4°C). Recessed on/off switches for rail and base are located behind the hinged louver door.

Electrical Connections: 115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8 (2.4m) cord and plug.

Casters: Equipment is mounted on 5 (12.7cm) diameter casters; overall height of casters is 6.13 (15.6cm).