OvenRacks
Standard Features & Benefits
Oven racks are available with A, B, C lifts
Racks are avaiable for Baxterฎ, Bakers Aidฎ, Geminiฎ,Hobartฎ, Lucksฎ, and Reventฎ
Standard runners are 1 x 1 1/2 wide
Units designed to hold 18 x 26 sheet pans or 20 x 30 tray, depending on the model
End load, side load, and double side load available
Custom runners available
All welded aluminum or stainless steel construction for maximum strength
All units have 4 super high temperature casters which will withstand heat up to 550 degrees
Oven racks may be different in older ovens.
Please call before ordering
Aluminum Specifications:
CONSTRUCTION:
Constructed of heavy duty extruded type 6063 aluminum alloy.
FRAME:
Upright and top, middle, and bottom cross braces are 1 square tubing (.063 thick).
Competely welded for maximum strength.
A LIFT:
One inch round Aluminum pipe at top of locator bracket.
C LIFT AND B-LIFT:
Channel constructed, two per double and four for single end load.
RUNNERS:
All runners are fully welded to the uprights. Extruded runners are 1 x 11⁄2 x .078.
CASTERS:
Unit features a 4 swivel plate caster with double ball bearing plate.
Wheels are super high temperature with zirc fitting.
Stainless Steel Specifications:
CONSTRUCTION:
Constructed of stainless steel 16 GA 304 Series
FRAME:
Upright and top, middle, and bottom cross braces are 1 square tubing.
Competely welded for maximum strength.
A LIFT:
One inch round S/S pipe at top of locator bracket.
C LIFT AND B-LIFT:
Channel constructed, two per double and four for single end load.
RUNNERS:
All runners are fully welded to the uprights.
Runners are 1 x 11⁄2.
CASTERS:
Unit features a 4 swivel plate caster with double ball bearing plate.
Wheels are super high temperature with zirc fitting
Products are sometimes shown with optional equipment - material choices and/or finishes may affect pricing for furniture.
Some items may not comply with California Proposition 65.
|
Return To Top
