OvenRacks Standard Features & Benefits • Oven racks are available with A, B, C lifts
• Racks are avaiable for Baxter®, Bakers Aid®, Gemini®,Hobart®, Lucks®, and Revent®
• Standard runners are 1” x 1 1/2” wide
• Units designed to hold 18” x 26” sheet pans or 20” x 30” tray, depending on the model
• End load, side load, and double side load available
• Custom runners available
• All welded aluminum or stainless steel construction for maximum strength
• All units have 4” super high temperature casters which will withstand heat up to 550 degrees
• Oven racks may be different in older ovens.
• Please call before ordering Aluminum Specifications: CONSTRUCTION:
• Constructed of heavy duty extruded type 6063 aluminum alloy. FRAME:
• Upright and top, middle, and bottom cross braces are 1” square tubing (.063 thick).
• Competely welded for maximum strength. A LIFT:
• One inch round Aluminum pipe at top of locator bracket. C LIFT AND B-LIFT:
• Channel constructed, two per double and four for single end load. RUNNERS:
• All runners are fully welded to the uprights. Extruded runners are 1” x 11⁄2” x .078. CASTERS:
• Unit features a 4” swivel plate caster with double ball bearing plate.
• Wheels are super high temperature with zirc fitting. Stainless Steel Specifications: CONSTRUCTION:
• Constructed of stainless steel 16 GA 304 Series FRAME:
• Upright and top, middle, and bottom cross braces are 1” square tubing.
• Competely welded for maximum strength. A LIFT:
• One inch round S/S pipe at top of locator bracket. C LIFT AND B-LIFT:
• Channel constructed, two per double and four for single end load. RUNNERS:
• All runners are fully welded to the uprights.
• Runners are 1” x 11⁄2”.
CASTERS:
• Unit features a 4” swivel plate caster with double ball bearing plate.
• Wheels are super high temperature with zirc fitting
Products are sometimes shown with optional equipment - material choices and/or finishes may affect pricing for furniture.
Some items may not comply with California Proposition 65.
|
Acrobat Reader
Return To Top
