Pitco Fryer Filter Mobile

STANDARD SPECIFICATIONS

Unit shall have the ability to receive oil gravity drained from fryers. Models P-18, 24 & 34 shall have 450 square inches (2,903 square cm) of filter area. Unit shall have a polished stainless steel filter pan and pump enclosure; all other surfaces to be nickel plated.

Mobile filtering of all of your frying appliances. Filter can be used with gravity drain fryers.
Pumps up to 5.6 gallons (21.2 liters) per minute.

CONSTRUCTION
􀂄 Filter pan and pump assembly enclosure are constructed of polished stainless steel.
􀂄 All other surfaces are nickel plated finish.
􀂄 Welded steel frame mounted on four ball-bearing swivel casters for easy movement.
􀂄 1/3 HP heavy duty motor and pump assembly.
􀂄 5 foot (1.5 meter) flexible, sanitary, high temperature return hose equipped with nozzle.
􀂄 Return hose nozzle is nickel plated steel with a non-heat conducting handle.
􀂄 Extra large filter area for large fryer filtering.

CONTROLS
􀂄 ON/OFF/HEATER ON switch for operating pump.

OPERATIONS
􀂄 Four swivel caster design allows for easy movement and storage of the filter.
􀂄 Quick disconnect hose connections make it easy to assemble and disassemble.
􀂄 Low profile allows for easy placement under the fryer drain.
􀂄 Easy to remove filter media assembly for quick and easy filter paper replacement.
􀂄 Lift out filter pan for easy cleaning.

STANDARD ACCESSORIES
􀂄 10 Foot (3.05 meters) oil proof supply cord
􀂄 Filter Pan
􀂄 Filter catch basket
􀂄 25 sheets of heavy duty filter paper (flat)
􀂄 Sample filter powder packets
􀂄 1 sediment clean out scoop
􀂄 1 - 7 inch (17.8 cm.) drain nipple

APPROVALS
􀂄 CSA Certified (AGA, CGA)
􀂄 NSF Listed
􀂄 MEA Approved
􀂄 CE Certified
􀂄 UL Listed

Dimensions:
24"H x 30"D x 17"W
10-1/2" Filter Pan Height

Electrical:
120 VAC / 60 Hz / 10 AMP
NEMA 5-15P Plug