|
|
Atlas Metal Hot/Cold Drop-In Unit 3 Pans |RMHP-3
|
|
|
|
| * Handling fee may apply if shipped to the following states: FL |
|
|
|
| Product Details |
|
| |
DESCRIPTION:
Two units in one! This versatile drop-in serving unit is a fully self-contained refrigerated cold pan or, at the flip of a switch, an electrically heated bain marie. Your hot breakfast bar can be a refrigerated salad bar for lunch - with one piece of equipment. The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that is can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4" stainless steel drain.
FEATURES:
- Dual Temp. - a hot serving unit becomes a refrigerated cold pan at the flip of a switch
- Fully insulated for energy savings
- Factory applied gasket - makes installation a snap and seals units to the counter top, thus eliminating seepage
- Stainless steel adapter bars
- NSF certified and UL recognized
- Classified NSF Standard 7 and 4 by UL
TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface of the top to hold the removable adapter bars in place. A full set of adapter bars is provided.
LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The liner has copper tubing firmly soldered to the exterior sides. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided.
INSULATION: The pan is fully insulated with high density polystyrene, 1-3/8" thick on all sides, 1-1/2" thick on the bottom and enclosed with a 22 gauge galvanized steel outer liner. The entire unit is removable without the use of tools.
HEATING ELEMENT: The bottom of the pan is provided with an immersion type heating element, covered with a perforated stainless steel sheath and a thermostat control. For safety, the element will operate only when fully submerged in water.
REFRIGERATION SYSTEM: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.
NOTE: Proper ventilation must be provided in counter.
ELECTRICAL: The unit is pre - wired with a hot/cold selector switch that prevents dual operation and the required thermostat controls and pilot light. The unit is provided with a 6' long, 3-wire cord and a twist lock plug.
***NOTE: The picture is of a generic product. Please refer to the product description for specific product information.***
Products are sometimes shown with optional equipment - material choices and/or finishes may affect pricing for furniture.
Some items may not comply with California Proposition 65.
|
| Suggest a substitution |
|
| Product Specifications |
|
| |
| Product Name: |
Atlas Metal Hot/Cold Drop-In Unit 3 Pans |RMHP-3 |
| Manufacturer Name: |
Atlas Metal Industries, Inc |
| Product ID: |
ATM-RMHP3 |
| Equivalents: |
RMHP3, RMHP-3 |
| Manufacturer Part Number: |
RMHP-3 |
| Material: |
Stainless Steel |
| Brand Name: |
Atlas Metal Industries, Inc |
| UPC: |
n/a |
| Vendor Description: |
Hot/Cold Drop In Unit, dual temp., 3-pan size, NSF |
| Product Notes: |
Hot/Cold Drop In Unit, dual temp., 3-pan size, NSF-7 |
| Dimension (L x W x H): |
44.75 x 26.25 x 26.75
|
| Shipping Weight: |
230 lbs. |
| Product Weight: |
230 lbs. |
| Product Cube: |
18.18 |
|
|
| Did you find the information you needed? Try here for more information. |
|
| Comparison Products |
|
| |
| ** Estimated pricing is based upon a sampling of different shipping points across the continental U.S. The exact cost of shipping will be shown during check out. Estimated shipping is for our ground super saver shipping option. |
| |
| |
 |
 |
| | Atlas-Metal-HotCold-Drop-In-Unit-3-Pans-RMHP-3 |
Atlas-Metal-HotCold-Drop-In-Unit-WCM-HP-3 |
| |
$5,229.33 |
$4,622.67 |
| |
|
|
| Product Features |
| Manufacturer | Atlas Metal Industries, Inc | Atlas Metal Industries, Inc |
| Mfg Product ID | RMHP-3 | WCM-HP-3 |
| Description | Hot/Cold Drop In Unit, dual temp., 3-pan size, NSF-7 | Hot/Cold Drop In Unit, single tank w/thermostat switch for hot or cold operation, w/self-contained refrigeration system and immersion type heating element |
| Brand Name | Atlas Metal Industries, Inc | Atlas Metal Industries, Inc |
| Material | Stainless Steel | Stainless Steel |
Dimension
(LxWxH) | 44.75 x 26.25 x 26.75 | N/A |
| Weight (lb) | 230 | 190 |
| Cube | 18.18 | 0 |
| Product Price |
$5,229.33 |
$4,622.67 |
Avg Shipping**
Estimate |
$139.50 |
$125.50 |
| Subtotal |
$5,368.83 |
$4,748.17 |
| |
|
|
|
|
|
|
|
|
 Spec Sheet |
 Companions |
 Comparisons |
 Accessories |
 MSDS Sheet |
 CAD Drawings |
 Installation Manual |
 Operating Manual |
 Parts Manual |
|
|
|
|
Return To Top
