True T-49DT-G| Refrigerator Dual Temp 2 Glass Doors| 46CuFt

Glass Door Dual Temperature Refrigerators/Freezer - Two Doors - Upright - T-49DT-G

• Oversized and balanced, refrigeration system, factory sealed and pre-lubricated for long life (134A refrigerator / R404A freezer).
• True's dual temperature models are equipped with two, self contained, independent refrigeration systems (CFC free) in a bottom mount design.
• Refrigerator holds 33°F to 38°F; freezer holds -10°F.
• 300 series stainless steel front (the finest stainless available).
• Interior - attractive, NSF approved, white vinyl coated aluminum and 300 series stainless floor.
• Anodized quality aluminum finished ends, back and top.
• Positive seal self-closing doors with factor tested (over 1,000,000 times) life-time guaranteed door hinges and torsion type closure system.
• Adjustable heavy duty vinyl coated wire shelves.
• Exterior mounted temperature monitor.
• Foamed-in-place polyurethane high density cell insulation (CFC Free).
• 4" diameter swivel castors standard equipment.
• Door locks standard.
• Dual, exterior mounted, digital temperature monitors.
• Legs available for all models.
• Compartmentalized, incandescent, interior lighting (one for each door).
• Lifetime guaranteed recessed door handles standard on solid doors.
• Glass door models feature triple pane thermal glass.
• Self-contained system.
• T-23DT features the refrigerator on top and the freezer on the bottom.
• T-49DT features the refrigerator on the left and the freezer on the right.
• Freezer compartment features standard backguard and floor rack to improve airflow (T-49DT's only).

Description: Glass Door Dual Temperature Refrigerator/Freezer - Two Doors - Upright
Swing Doors: 2
Ref Cu. Ft.: 23
Frzr Cu. Ft.: 23
No of Shelves: 6
Ref HP: 1/3
Frzr HP: 3/4
Total Amps: 21.5
Weight: 480
L x D** x H*: 54 x 29-1/2 x 78-1/4
Special Requirements: Requires 115/208-230/60 Hz, single phase, 3 pole, 4 wire.

*Height does not include 5" for castor height or 6" for optional legs.
**Depth does not include 1-3/8" for door handle (glass door models only).