Compact Undercounter Refrigerator - 5.7 Cubic Ft.

• Features Delfields exclusive ABS interior.
• ABS is extremely durable - it wont dent, chip or corrode and is backed by a limited lifetime warranty
• Stainless steel front and sides
• Two epoxy coated wire shelves, standard installed per unit
• Environmentally friendly R404A refrigerant
• Foamed in place polyurethane cuts energy costs
• Black recessed quick grip handle
• Rugged 6 high heavy duty metal legs (models 406 & 407 only) Units with a CA suffix are standard on 3.75 casters
• All units come standard hinged right and may be changed at the factory at no charge. Indicate when order is placed
• 7 cord and plug supplied
• Electrical connections shall be 115 volt, 60 Hertz, single phase.
• Unit shall have a 7 (2.1m) long electrical cord and NEMA 5-15P plug.
• Cord and plug shall be located on rear of cabinet, 16 (40.6cm) above floor, 5 from the left side.

OPTIONS AND ACCESSORIES
 Stainless steel back
 Plastic laminate on front
 Additional shelf
 Stainless steel single-tier overshelf
 3.5 (8.9cm) diameter casters
 5 (12.7cm) diameter casters
 Model 409 stacking collar (adds 4 to overall combined height for use with models 406/407)
 Door lock
 220 volt, 50 Hertz electrical system

Exterior bottom shall be one piece 14-gauge galvanized metal. Exterior ends shall be 22-gauge stainless steel.

Base interior shall be one-piece thermoformed ABS plastic material, with integral shelf supports. ABS interior is backed by a limited lifetime warranty. Base shall be fully insulated with high-density foamed-in-place polyurethane.

Door shall have a 22-gauge stainless steel exterior, with a thermoformed ABS plastic interior liner, and shall be fully insulated with foamed-in-place polyurethane. Door handle shall be black, recessed ABS. Cabinet shall have (2) adjustable epoxy-coated wire shelves installed.

406/406-CA REFRIGERATORS ONLY
Refrigeration system shall use HFC-404A refrigerant. Compressor shall be 1/5 H.P., with condenser coil and hot gas condensate evaporator mounted on rear of cabinet. Evaporator coil and temperature control shall be mounted on the interior rear wall of the cabinet. Refrigerant flow shall be controlled by a capillary tube. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) interior cabinet temperature.

Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall have a 7 (2.1m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on rear of cabinet, 16 (40.6cm) above floor, 5 from the left side.

406/407
Equipment is shipped with loose 6 (15.2cm) high metal legs with black enamel finish unless mounting is specified on original sales order. Exterior top shall be one-piece, 22-gauge stainless steel with front edge turned down to form nosing and rear edge turned down.

406-CA/407-CA
Equipment is shipped with loose 3.75 (9.5cm) high casters (two locking and two non-locking) unless mounting is specified on original sales order. Exterior top shall be one-piece, 18-gauge aluminum with all edges turned down.

Dimensions: 35.5" x 27" x 28.5"
Amps: 7.0
HP: 1/5
Capacity: 7.2ft²