CHROME PLATED ADD-ON SHELVING UNIT ASSEMBLY - 4 WIRE SHELVES
The 4-Shelf Wire Starter Unit with add-on capability has a square post design that maximizes surface area and reduces assembly time. Posts are notched on 2" centers and dimpled every 6" to assure accurate shelf alignment.
Continue in a straight line or turn a corner at 90 degrees with add on units. This add-on unit consists of FOUR (4) shelves, TWO (2) posts and TWO (2) add on clips for each shelf. Add on units are economical and provide plenty of strength for most applications.
FEATURES:
Consists of four shelves and four posts
Cross-braces welded at each end inside leg of channel
Provides maximum air circulation for quick drying
Finish can withstand daily impact abuse of pots and pans, as well as corrosion
Shelves can conform to unique design to suit your needs
SPECIFICATIONS:
Dimensions - 84" high, 24" wide, 60" long
Shelves have #8 (.162) gauge crosswires spaced
A square tapered 1-3/4" high steel collar is to be welded at each corner
A suitable number of 262" rebrace wires are welded to the underside of 18", 21", and 24" wide shelves in
lengths of 54" and longer.
All contact points are welded
Shipped Unassembled
NSF-Approved
***PICTURE SHOWN IS FOR SIMILIAR PRODUCT***
