Carter-Hoffmann Bulk Chip Warmer Forced Air Heating 22 Gallons

Carter-Hoffmann CW2E bulk chip warmer uses forced air heating to keep warm up to 22 gallons of chips at one time. The CW2E can preheat its large compartment area up to 160 degrees Fahrenheit in about 20 minutes and the unit is capable of being heated to 190 degrees Fahrenheit. Carter-Hoffmann used full 1in thick continuous wrap around type high-density fiberglass insulation on the bottom and sides of the CW2E chip warmer to help with heat retention. The internal mechanical thermostat was pre-set by the Factory at 175 degrees Fahrenheit and if the user wants to adjust, all they need to do is use a grommet in the access hole. Carter-Hoffman uses a top mounted forced air heating system to ensure that the chips stay warm without burning. Not only is the CW2E chip warmer easy to use it is also easy to clean because it is made out of all stainless steel which wipes clean.

• Forced air heating system
• Inconel sheathed heating element
• First-in and first-out design
• Gravity fed
• Top loading
• Bottom hinged service door
• Extended end panels
• Stainless steel construction
• 4in legs
• 120V/601/1-ph
• 1530 watts, 12.8 amps
• NEMA 5-15P plug with 6ft cord
• UL, cUL certified
• Holding Capacity: 22 gallons
• Dimensions: 38-3/4in H x 22-3/4in W x 23in L