Full Size Can Storage Rack
Standard Features & Benefits
• Organize your inventory and optimize your storage with can racks
• Gravity-fed can racks give operators automatic stock rotation when you load from the back
• Shipped boxed and setup to be used straight out of the box
• All welded aluminum construction
• New 210 holds 7 #10 cans per level
• CSR216 is 4 wide to maximize storage room space
• Lifetime Guarantee Against Rust
Specifications:
• CONSTRUCTION:
Constructed of heavy-duty extruded type 6063 aluminum alloy. Unit is fully welded.
• FRAME & CROSS-SUPPORTS:
Uprights consist of 1-1⁄2” square aluminum tubing (.063 thick), welded to horizontal 1” square tubing (.063 thick) to support the can slides.
• CAN SLIDES:
Consist of extruded angles 1” x 1-1⁄2” x .078 thick and extruded T-Bar 3” x .078 thick. Both ends of can slides are notched with a miter and radius cut. Each end is turned up 3⁄4”. Can slides and T-Bar are welded to the frame. Spacing for the slides is 7-3/8” on center. The back of each slide is set 1” higher to allow the cans to roll forward.
• MOBILE:
Units are fitted with polyurethane plate casters, two swivel and two with brakes, mounted to a 1/8” aluminum plate welded to the base. Factory Installed. Casters Not Available on CSRE-162.
• CAPACITY: #10: 210; # 5: 280
• Dimensions: 80"H x 28"W x 42"D
Spec Sheet
