Aluminum Half-Size Mobile Can Storage Rack w/ Alum Top - (54) #10 Cans

Half Size Can Storage Rack

Standard Features & Benefits
• Heavy duty, all welded aluminum shelving with mitered top for extra strength
• No assembly required, unit ships setup
• Standard heights: 48”, 60”, 72”
• Shelving is available in: Tubular, Channel, and T-Bar
• Two, Three, and Four Tier available
• Custom sizes and spacing available
• Load Capacity up to 1600 lbs. per shelf
• Meets NSF specification for use in walk in coolers and freezers
• Lifetime Guarantee Against Rust

Specifications:

CONSTRUCTION:
Constructed of heavy-duty extruded type 6063 aluminum alloy. Unit is fully welded.

FRAME & CROSS-SUPPORTS:
Uprights consist of 1 1⁄2” square aluminum tubing (.063 thick), welded to horizontal 1” square tubing (.063 thick) to support the can slides.

CAN SLIDES:
Consist of extruded angles 1” x 1 1⁄2” x .078 thick and extruded T-Bar 3” x .078 thick. Can slides and T-Bar are welded to the frame. Spacing for the slides is 7 3/8” on center. The back of each slide is set 1” higher to allow the cans to roll forward.

CASTERS:
5” polyurethane plate casters two swivel and two with 2 brakes.

POLY TOP :
Models are equipped with a 5/8” polyethylene material held in place by four (4) tabs welded to the unit (CSR54, CSR 72 series).

ALUMINUM TOP:
Models are fitted with a .090 thick aluminum sheet with 1” lips turned down.

STAINLESS STEEL TOP:
Models are fitted with a 16-gauge Stainless Steel sheet with 1” lips turned down, all corners welded and polished.

• #10 Can Capacity: 54
• #5 Can Capacity: 72
• Dimensions: 28"W x 35"L x 35"H
• Top: Aluminum