Full Size Can Storage Rack
Standard Features & Benefits
Organize your inventory and optimize your storage with can racks
Gravity-fed can racks give operators automatic stock rotation when you load from the back
Shipped boxed and setup to be used straight out of the box
All welded aluminum construction
New 210 holds 7 #10 cans per level
CSR216 is 4 wide to maximize storage room space
Lifetime Guarantee Against Rust
Specifications:
CONSTRUCTION:
Constructed of heavy-duty extruded type 6063 aluminum alloy. Unit is fully welded.
FRAME & CROSS-SUPPORTS:
Uprights consist of 1-1⁄2 square aluminum tubing (.063 thick), welded to horizontal 1 square tubing (.063 thick) to support the can slides.
CAN SLIDES:
Consist of extruded angles 1 x 1-1⁄2 x .078 thick and extruded T-Bar 3 x .078 thick. Both ends of can slides are notched with a miter and radius cut. Each end is turned up 3⁄4. Can slides and T-Bar are welded to the frame. Spacing for the slides is 7-3/8 on center. The back of each slide is set 1 higher to allow the cans to roll forward.
MOBILE:
Units are fitted with polyurethane plate casters, two swivel and two with brakes, mounted to a 1/8 aluminum plate welded to the base. Factory Installed. Casters Not Available on CSRE-162.
CAPACITY: #10: 162; # 5: 216
Dimensions: 25"W x 35"L x 71"H
Products are sometimes shown with optional equipment - material choices and/or finishes may affect pricing for furniture.
Some items may not comply with California Proposition 65.
|
Return To Top
