Eagle Group 414-16-1-18| 1 Comp Sink (2) Drainboards

414 Series Deep-Drawn Coved Corner One Compartment Sink - 18" Drainboards (Left and Right)

• Bowl size: 19"W x 16"L
• # Drainboards: 2
• Drainboard Length: 18"
• Overall size: 26"L x 54"W x 37.5"H

• 14" (356mm) water level is standard.
• Heavy gauge stainless steel construction bowls are type 304; drainboards and backsplash are type 430.
• Deep-drawn seamless coved corner bowls.
• Swirl-away drainage.
• Legs welded adjacent to sink bowl for maximum weight support and stability.
• 9-1⁄2" (241mm) standard backsplash includes1" (25mm) upturn and tile edge for easy installation and feathering to wall/splash surface.
• Adjustable non-corrosive bullet feet.
• Die-stamped creased drainboards for positive drainage.

NSF-approved installations:
• All EAGLE sinks bearing the NSF Certification Mark are built in compliance with the National Sanitation Foundation Standard Number 2.
• EAGLE is also listed to manufacture custom-built sinks in compliance with the National Sanitation Foundation Standard Number 2.

Material:
• Sink Bowl Heavy gauge type 304 stainless steel.
• Top Drainboards, backsplash and rolled rims are heavy gauge type 430 stainless steel.
• Legs 1-5⁄8" (41mm)-diameter heavy-gauge galvanized tubing with plated 12-gauge gussets and high-impact corrosion resistant fully adjustable bullet feet crossbracing is 1" (25mm)-diameter heavy-gauge galvanized tubing.

Optional stainless steel legs utilize 16/304 tubing (SOLD SEPARATELY).

Design and Construction Features:
• Sink bowl has deep-drawn one-piece seamless construction using state-of-the-art hydraulic presses.
• Drainboards, when provided, are integrally welded.
• Sink bowl has a generous radius with a minimum dimension of 3" (76mm) and are rectangular for maximum capacity.
• Legs are welded adjacent to sink bowl, providing increased stability and maximum weight support where needed.
• Leg gussets welded to a die-cut heavy-gauge reinforcing plate.
• Entire assembly is fuse-welded and planished providing a one-piece seamless sink unit.
• Welded areas are high-speed belt blended to match adjacent surfaces with continuity of satin finish.
• 9-1⁄2" (241mm)-high full length standard backsplash features 1" (25mm) upturn and tile edge for easy installation and feathering to wall/splash surface.
• All outside corners of sink assembly are bullnosed to provide safe, clean edges.
• 14" (356mm) water level 17" (432mm) flood level. Mechanical:
• Water supply is 1⁄2" (13mm) IPS for hot and cold lines.
• Faucet holes are 1-1⁄8" (29mm) punched on8" (203mm) centers.
• Faucets are available as options.
• Basket-type waste drain included fits sink bowls 3-1⁄2" (89mm) opening and features 1-1⁄2" (38mm) outlet.