Eagle Group 2148-3-16/4| 3 Comp Square Corner Sink| 24in x 51in

Three Compartment Utility Sink

• 24-1/2"W x 51"L x 42-1/2"H including 8" backsplash
• A basic sink designed for numerous applications when NSF approval is not required.
• All partitions have 5/8" (16mm)-wide rolled top edge.
• Leg locations fall directly under sink bowls providing increased stability and maximum weight support where needed.
• Entire assembly is fused, welded and planished providing a one-piece seamless sink unit.
• Welded areas are high-speed belt blended to match adjacent surfaces with continuity of satin finish.
• Leg gussets are welded to a die-cut heavy-gauge reinforcing channel.
• All outside corners of sink assembly are bullnosed to provide safe, clean edges.
• Water supply is 1/2" (13mm) IPS for hot and cold lines.
• Faucet holes are punched on 8" (203mm) centers.
• Faucet not included.
• Basket-type waste drains are 1-1/2" (38mm) IPS and included.
• Sink 16 gauge type 430 S/S.
• Legs 1-5/8" (41mm)-diameter heavy-gauge galvanized tubing with plated 12-gauge gussets and high-impact corrosion-resistant fully adjustable bullet feet.